Super X Crossmember

Home \| Contact Us

Text Box: Crossmember legs come in two lengths. Use either length for front or rear crossmember legs. Order any combination of lengths you might need. Pieces are made from 10ga. Mild steel.

Text Box: Two piece center crossmember with boxing plate. Drive shaft loop can be mounted up or down depending on shaft location. The arms weld to the face of this crossmember. Pieces are made from 10ga. Mild steel.
Dimensions are:
18 in. X 5-9/16 in 41 in. X 5-3/4 in. w/ 1-3/4 in. lip.

Text Box: $150.00 both pieces
PN-ux5042b

60 in. x 5 1/4 in. w/ 2 in. lip 38 in. x 5 1/4 in. w/ 2 in. lip

Text Box: $140.00 pair
PN-ux5038

Text Box: $150.00 pair
PN-ux5060

Built as a "K" Member Built as an "X" Member

	Build your own Super X Crossmember
	Can be cut-to-length as needed
	Buy just the parts you need
	Install driveshaft loop up or down to clear you driveshaft
	Precision laser cut
	Large oval slots (3-1/2 in. tall) will accommodate almost any exhaust
	Scalloped ends to allow room for lines etc.

Recommended for experienced fabricators and builders.

HAVING FUN WITH HOT RODS!

Uiversal Crossmember Kit